Stihl AR 2000 L Manual De Instrucciones página 8

English
The state charge is indicated when the LEDs
glow or flash green and there is a short beep.
► If the right-hand LED flashes green and there
are four long beeps: Charge the battery.
► If the LEDs glow or flash red or there are no
beeps: Rectify the malfunction,
There is a malfunction in the cordless product
or battery.
► If the four right-hand LEDs on the battery flash
red and short beeps sound in quick succes‐
sion: Troubleshooting,
There is a fault in the battery.
7 Assembling the Battery
7.1 Fitting the Connecting Cable
2
► Position the connector (1) with the connecting
cable facing up.
► Insert the connector (1) in the socket (2).
7.2 Fitting and Removing Battery
and Cable on Carrying System
7.2.1 Fitting Battery and Cable on Carrying
System
► Insert the connector (1).
2 3
8
18.1
18.1.
1
1
► Position the battery (2) on the carrying system
(3) so that the guides on the carrying system
engage the recesses in the battery.
1
5
2
► Open the lever (4) and hold it there.
► Press the carrying system (3) against the bat‐
tery (2) until the connector (1) locates against
the socket (5).
► Swing the lever (4) down. It must snap into
place.
7.2.2 Removing Battery and Cable from
Carrying System
► Open the lever.
► Remove the battery.
► Remove the connector.
8 Adjusting Battery for User
8.1 Adjusting Carrying System to
Suit User's Height
The carrying system can be set to positions S, M
or L to suit the user's height.
1
► Depress the locking tab (1) and push it in
direction of arrow.
► Remove the slide (2).
7 Assembling the Battery
4
3
4
2
0458-820-9901-A
2