Publicidad
Idiomas disponibles
Idiomas disponibles
USE OF EACH FUNCTION BUTTON
After plugging in the power supply, the power-on sound "Bi~Bi~" will be emitted and enter the standby state and all
function indicators will not light up. Except for the Power Button
1 Power Button
1) After power-on in standby state, press the Power Button
default state of power-on is:
a. Fan: low level airflow speed, display panel has no display.
b. Oscillation Off.
c. Timer: No.
d. Auto mode: Off
2 Oscillation Button
Press the Oscillation Button to start and stop oscillation function.
3 Airflow Speed Button
Press the Airflow Speed Button to increase and decrease the airflow speed.
Level 1→ Level 2 → Level 3
The Airflow speed indicator is shown on the control panel corresponding to the set speed.
4 Timer (+) Button
1) In the power-on state, press the Timer Button
range is 0-24 hours, displayed on display panel . (00 means no timer set)In the power-on
state, press the
lights up, which is the timer setting state; press the
is increased by 1 hour, the timer indicator lights up and Display panel shows corresponding
digits. Press and hold the
and the display changes accordingly.
2) In the standby state, press the
The timer range is 0-24 hours, which is incremented by hours and displayed. In the standby
state, press the
state; press the
not cycle. During the setting process, LED flashes to display the currently set time; wait for
3 seconds to set the schedule time successfully.
and the Timer Button, other buttons are invalid.
button, LED flashes and displays the current set timer, and the LED "h"
button for more than 2 seconds to increase the time rapidly
timer/presetting button to set the scheduled start time.
button, LED flashes and the Led "h" lights up, which is the timer setting
button again to adjust the schedule time up, and the adjustment does
to turn on the power. The
to reset the schedule function. The timer
button again, the set working time
13
Publicidad
