Descargar Imprimir esta página

Blaupunkt 1 011 451 001 001 Instrucciones De Manejo E Instalación página 9

Ocultar thumbs Ver también para 1 011 451 001 001:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

OPERATION
LOUDNESS
Press and hold the EQ button for 2 seconds
to activate the LOUD function. Press and
hold it again to cancel the function.
DISPLAYING INFORMATION
Press the DISP button (6) to show the time
for 5 seconds. Afterwards, it shows the
information again.
SETTING THE TIME
Press and hold the DISP button for 2
seconds. The hour indicators are flashing.
Briefly press the
/
correct hour. Briefly press the DISP button
to change to minutes. Use the
button again to set the correct minute.
Afterwards, press the SEL button to
confirm.
AUXILIARY INPUT
The unit can be connected to a portable
audio player through the AUX IN jack (8).
RESET FUNCTION
The RESET button (23) must be activated
with either a ballpoint pen or pointed metal
object.
The RESET button is activated for the
following reasons:
-
Initial installation of the unit when all
wiring is completed.
-
All the function buttons do not operate.
-
Error symbol on the display.
Note: If the RESET button (23) is pressed
and the unit does not work, please use a
cotton swab moistened with isopropyl
alcohol to clean the socket on the front
panel.
All manuals and user guides at all-guides.com
RADIO OPERATION
button to set the
/
8
SWITCHING TO RADIO MODE
Press the SRC button (1) to select radio
mode, which appears in the display
together with the memory bank and
frequency.
SELECTING
THE
BAND
In radio mode, press the BAND button
(11) to select the desired band.
The reception band changes in the
following order:
→FM1→ FM2→ FM3 → MW1(AM1)→ MW2(AM2)
SELECTING A STATION
Press the
button (9) or
(5) briefly to activate automatic seek
function.
It
automatically
up/down for a station. Press it for 2
seconds until "MANUAL" appears on
the display, to select the manual tuning
mode.
In
this
mode,
incrementally scan frequencies up or
down until a station has been located. If
both buttons have not been pressed for
5 seconds, it will return to seek tuning
mode and "AUTO" appears on the
display.
E
N
G
L
I
S
H
FREQUENCY
button
searches
you
can

Publicidad

loading

Este manual también es adecuado para:

Tokyo 110