Descargar Imprimir esta página

Hansgrohe Raindance Rainfall 28411 1 Serie Instrucciones De Montaje / Manejo / Garantía página 2

Ocultar thumbs Ver también para Raindance Rainfall 28411 1 Serie:

Publicidad

English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Max. flow rate (per spray mode)
* Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that this
unit be installed by a licensed, professional plumber.
• This unit requires iBox Universal Plus rough
01850181.
• The rough must be installed and the finished wall
surface must be complete and made watertight
before installation of this unit.
This unit must be installed with Quattro
Green diverter rough 15936181 (included).
Please refer to the installation instructions included
with the rough. The trim kit for the Quattro Green is
sold separately.
• The Quattro Green insures that the flow rate of the
showerhead does not exceed 2.5 GPM. It does not
permit the use of two functions at once.
• There are no controls on the Raindance Rainfall.
The spray functions are controlled by the Quattro
Green diverter.
• Hansgrohe also recommends iBox Universal plus
01850181 with a thermostatic mixing valve trim and
volume control valve 15977181 with matching trim.
Valves and trims are specified and sold separately.
This unit meets or exceeds the
following:
• ASME A112.18.1
• CSA B125.1
• Listed by IAPMO for use in the US
and Canada
2
22 - 60 PSI
145 PSI
120° - 140° F*
176°F*
2.5 GPM
• To prevent scald injury, the maximum output
• This showerhead is for use with automatic
• This showerhead should not be used with a
• Please read over these instructions thoroughly
• Keep this booklet and the receipt (or other proof
temperature of the shower valve should be no
higher than 120°F. In Massachusetts, the maximum
output temperature of the shower valve can be no
higher than 112°F.
compensating valves rated at 2.0 GPM (7.6 L/min)
or less.
continuous flow water heater.
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.

Publicidad

loading