Publicidad
Idiomas disponibles
Idiomas disponibles
Ensure the eBike battery is placed on clean sur-
u
faces only. Avoid getting dirt, e.g. sand or soil, in
the charging socket and contacts in particular.
The PowerMore battery is only permitted for in-
u
stallation on eBikes that the manufacturer has
designed specifically for such batteries. Check
whether your eBike is compatible for use with the
PowerMore battery. Follow the operating instruc-
tions of the eBike manufacturer. If you have any
questions or need further information, contact an
authorized bike dealership.
The eBike battery may only be used in the bat-
u
tery holder on the eBike.
Note: An eBike may also be fitted with two eBike bat-
teries. Follow the operating instructions of the eBike
manufacturer. If you have any questions or need fur-
ther information, contact an authorized bike dealer-
ship.
Note: During installation, pay particular attention to
the markings on the battery holder and on the Power-
More battery.
Note: The PowerMore battery is only permitted for in-
stallation on the guide rails provided. The guide rails
are only permitted for use with the PowerMore bat-
tery and the compatible bottle holder. Observe the
specifications of the eBike manufacturer.
Note: When laying the cable, follow the specifications
of the eBike manufacturer. If you have any questions
or need further information, contact an authorized
bike dealership.
Testing the eBike Battery Before Using it
for the First Time
Test the eBike battery before charging it for the first
time or using it in your eBike.
To do this, press the on/off button (5) to switch the
eBike battery on. If none of the LEDs on the battery
charge indicator (2) lights up, the eBike battery may
be damaged.
Bosch eBike Systems
Fitting
If at least one (but not all) of the LEDs on the battery
charge indicator (2) lights up, the eBike battery will
need to be fully charged before using it for the first
time.
Do not charge or use eBike batteries if they are
u
damaged. Contact an authorized bicycle dealer.
Charging the eBike Battery
A Bosch eBike battery of the smart system gen-
u
eration of systems must only be charged using
an original Bosch charger from the smart sys-
tem generation of systems.
Note: The eBike battery is supplied partially charged.
To ensure full capacity of the eBike battery, fully
charge the battery in the charger before using it for
the first time.
To charge the eBike battery, read and follow the in-
structions in the operating manual for the charger.
The eBike battery can be charged at any state of
charge. Interrupting the charging process does not
damage the eBike battery.
The eBike battery has a temperature monitoring func-
tion that only allows it to be charged within a temper-
ature range of 32 °F to 104 °F.
Do not reconnect the eBike battery to the charger un-
til it has reached the correct charging temperature.
Battery charge indicator outside of the eBike
Note: The PowerMore battery charge indicator (2)
switches back off as soon as the eBike battery is
switched on.
English – 9
If the temperature of the
eBike battery is outside
this charging range, three
of the LEDs on the battery
charge indicator (2) will
flash. Disconnect the
eBike battery from the
charger and let it reach
the correct temperature
range.
0 275 U07 3RE | (20.03.2023)
Publicidad
