NORAUTO 2611823-NO3193 Manual página 28

Line connection for visual reversing
1. Connect camera's
power interface to
reversing lamp power
connector through
cable C.
2. If you need to install
an external monitor,
find the video cable
connecting the camera
and the monitor screen,
as shown by G (AV).
3. The camera's power
cable is powered by DC.
4. Connect the monitor's
power interface to
vehicle's power supply
connection via H (DC)
line.
5. Connect the G (AV)
cable to the camera's video connector B (usually
white).
6. Connect the video cable to the monitor screen or
to the car radio.
TECHNICAL DATA
Rate voltage
Rate current
Waterproof level
Monitor (not
included)
12V DC
60-70 mA
IP67
EN
27