Toro Revolution 60V Manual Del Operador página 12

3
Installing the Harness
No Parts Required
Procedure
Important:
If you are using the string trimmer
with a 6.0 Ah or greater battery pack installed,
install the included shoulder harness.
Do not use the shoulder harness if you are
powering the string trimmer with the backpack
and backpack tether; use only the backpack
harness.
Connect the metal hook on the shoulder harness to
the strap collar on the trimmer handle
1. Strap adjuster
2. Metal strap hook
3. Strap collar
(Figure
Figure 6
4. Shoulder strap
5. Quick-release buckle
The strap length is adjustable; slide the strap adjuster
up to decrease the length of the strap, or down to
increase the length of the strap
If there you ever need to rapidly remove the harness,
disconnect the quick-release buckle as follows:
1. Press in on the sides of the buckle (A of
7).
2. Allow the buckle to disconnect (B of
6).
g388180
10
(Figure 6).
Figure
Figure 7
Figure
7).
g340477