Publicidad
Idiomas disponibles
Idiomas disponibles
3. To fit the extension hose, insert extension hose into the air intake on the top of appliance. Press until
it clicks into position (see the fig.4).
NOTE:
1) To remove the extension hose, unplug from the power socket, then release
the extension hose from the air intake.
2) Do not use the hose to suck up water.
3) Do not immerse the hose in water for cleaning.
4) The hose should be checked regularly and must not be used if damaged.
4. Before using appliance, pull a sufficient length of cable from the appliance and insert the plug into
the power socket. A yellow mark on the power cable shows the ideal cable length. Don't expend the
cable beyond the red mark.
NOTE:
1) To rewind the power cable, press the rewind button beneath the body handle with one hand and guide
the cable with the other hand to ensure that it does not whip causing damage.
2) While the body handle is closed, causing the rewind button closed, the power cable will be rewound
automatically.
5. Turn the power switch to start the appliance and control the dust suction.
6. Adjust the length of extension tube by sliding the slidable button to facilitate cleaning.
THE USE OF ACCESSORY
1. The flat suction spout can be used for radiators, crevices, corners, baseboards and
between cushions (see the fig.5).
Fig.5
2. The rotating brush and rectangular suction spout can be used for furniture,
vent, blinds, book, lamp shades and shelves (see the fig.6).
INSTRUCTIONS FOR USE
Before using appliance, unwind a sufficient length of cable and insert the plug into the power socket.
A yellow mark on the power cable shows the ideal cable length. Don't expend the cable beyond the red
mark.
1. Press the ON/OFF button to switch the appliance on.
On/Off Button
- 11 -
Fig.4
Fig.6
Publicidad
