Philips AZ7902 Manual Del Usuario página 14

FEATURES
Programming track numbers
You can select up to 15 tracks and store them in
memory in a desired sequence. Any track can be stored
more than once.
1 While playback is stopped, select a track with
∞ or §.
2 Press PROGRAM to store the track.
lights up; the track number
y
PROGRAM
programmed and P with the total number of
stored tracks are displayed.
3 Select and store all desired tracks in this way.
4 Press 2; to start playback of your selected tracks.
is shown and playback starts.
y
PROGRAM
• You can review the program by pressing PROGRAM for more than 2 seconds.
The display shows all stored tracks in sequence.
y
Notes: – If you press PROGRAM and there is no track selected,
SELECt is displayed.
– If you try to store more than 15 tracks, FULL is displayed.
Clearing the program
1 If necessary, press 9 to stop playback.
2 Press 9 to clear the program.
CLEAr is displayed once,
y
and the program is cleared.
Note: The program also will be cleared if you
– interrupt the power supply or
– open the CD lid,
– or if the player switches off automatically.
14
goes off,
PROGRAM