Trevi MAX 20 Manual De Usuario página 28

supply from the wall outlet and then disconnect the plug from the Type-C of the phone.
RECHARGE THROUGH "CHARGING BASE" (SUPPLIED):
1. Connect the Type-C plug of the supplied cable to the Type-C base (18);
2. Connect the USB outlet on the same power supply cable and plug the latter to a standard
wall outlet;
3. Enter the phone turned Off inside the base with the keypad facing frontally, the device
will switch on for a few seconds to show the battery icon with charging;
4. When the battery is fully charged (the icon is no longer moving) you can remove the
phone from the base and use it normally.
Notes:
• Use only the USB/ Type-C cable supplied.
• Use only the mains adapter supplied, different power supplies may damage the battery.
• You can use the device even when it is charging, but, for longer life battery, not
recommended for use; Furthermore, using the apparatus, the timing of Charging may
take longer.
• While charging the device can increase in temperature, this does not affect performance
and machine life.
1. Receiver.
2. Display.
3. Enter main menu in idle mode.
Press left soft key, then press * to lock/
unlock the key pad.
4. Dial and receive a call.
View All calls in the standby mode.
5. Press to input *,+.
Press to enter symbol when editing text.
6. Earphone jack (3.5mm).
7. Type-C socket.
8. Press to switch input modes when
entering text.
Press and hold to activate or deactivate
the silent mode when phone is in idle
mode.
9. Enter numbers, letters or characters.
5. Keys Functions
10. Pressing and holding to turn the phone
On/Off.
End a call or reject an incoming call.
Return to the idle mode.
11. Access the contact list in idle mode.
Return to previous menu.
12. Press to access four functions in idle mode
Up − Write new message
Down − Calendar
Within a menu, press Up or Down to
scroll through menu options.
13. Led indicator
14. Camera.
15. Speaker.
16. SOS button.
17. Metal pins for phone connection.
18. Type-C socket for adaptor.
28