ABB ACH580-34 Guía Rápida De Instalación Y Puesta En Marcha página 291

• Safety integrity level (SIL, EN 62061): 3
• Performance level (PL, EN ISO 13849-1): e
The drive STO is a type A safety component as defined in IEC 61508-2.
For the full safety data, exact failure rates and failure modes of the STO function, refer
to the drive hardware manual.
Markings
CE UL RCM
Declarations of conformity
EU Declaration of Conformity
Machinery Directive 2006/42/EC
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxx
We
Manufacturer: ABB Oy
Address: Hiomotie 13, 00380 Helsinki, Finland.
Phone: +358 10 22 11
declare under our sole responsibility that the following product:
Frequency converters
ACH580-04/-34
with regard to the safety function
Safe Torque Off
is in conformity with all the relevant safety component requirements of EU Machinery Directive 2006/42/EC, when the listed safety function is used
for safety component functionality.
The following harmonized standards have been applied:
EN 61800-5-2:2007 Adjustable speed electrical power drive systems – Part 5-2: Safety
requirements - Functional
EN IEC 62061:2021 Safety of machinery – Functional safety of safety-related control systems
EN ISO 13849-1:2015 Safety of machinery – Safety-related parts of control systems. Part 1: General
requirements
EN ISO 13849-2:2012 Safety of machinery – Safety-related parts of the control systems. Part 2:
Validation
EN 60204-1:2018
Safety of machinery – Electrical equipment of machines – Part 1: General
requirements
The following other standards have been applied:
IEC 61508:2010, parts 1-2 Functional safety of electrical / electronic / programmable electronic safety-
related systems
IEC 61800-5-2:2016 Adjustable speed electrical power drive systems – Part 5-2: Safety
requirements - Functional
The product(s) referred in this Declaration of conformity fulfil(s) the relevant provisions of other European Union Directives which are notified in
Single EU Declaration of conformity 3AXD10000497691.
Authorized to compile the technical file: ABB Oy, Hiomotie 13, 00380 Helsinki, Finland.
Helsinki, August 31, 2022
Signed for and on behalf of:
Mika Vartiainen
Local Division Manager
ABB Oy
Document number 3AXD10000611401
Page 1 of 1
Related documents
You can find other languages of this guide, manuals and other product documents in
PDF format on the Internet at www.abb.com/drives/documents.
TÜV UKCA EAC
ABB
Harri Mustonen
Product Unit Manager
ABB Oy
Technical data and references 291
EIP RCM
Declaration of Conformity
Supply of Machinery (Safety) Regulations 2008
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
We
Manufacturer: ABB Oy
Address: Hiomotie 13, 00380 Helsinki, Finland.
Phone: +358 10 22 11
declare under our sole responsibility that the following product:
Frequency converters
ACH580-04/-34
with regard to the safety function
Safe Torque Off
is in conformity with all the relevant safety component requirements of the Supply of Machinery (Safety) Regulations 2008, when the listed safety
function is used for safety component functionality.
The following designated standards have been applied:
EN 61800-5-2:2007 Adjustable speed electrical power drive systems – Part 5-2: Safety requirements -
Functional
EN IEC 62061:2021
Safety of machinery – Functional safety of safety-related control systems
EN ISO 13849-1:2015 Safety of machinery – Safety-related parts of control systems. Part 1: General
requirements
EN ISO 13849-2:2012 Safety of machinery – Safety-related parts of the control systems. Part 2:
Validation
EN 60204-1:2018 Safety of machinery – Electrical equipment of machines – Part 1: General
requirements
The following other standards have been applied:
EN 61508:2010, parts 1-2 Functional safety of electrical / electronic / programmable electronic safety-
related systems
EN 61800-5-2:2017 Adjustable speed electrical power drive systems – Part 5-2: Safety requirements -
Functional
The product(s) referred in this declaration of conformity fulfil(s) the relevant provisions of other UK statutory requirements, which are notified in
a single declaration of conformity 3AXD10001325928.
Authorized to compile the technical file: ABB Limited, Daresbury Park, Cheshire, United Kingdom, WA4 4BT.
Helsinki, August 31, 2022
Signed for and on behalf of:
Mika Vartiainen
Local Division Manager
ABB Oy
Document number 3AXD10001329522
Page 1 of 1
KC WEEE BTL
ABB
xxxxxxxxxxxxxxxxxxxxxxxxxxx
Harri Mustonen
Product Unit Manager
ABB Oy
EN
DA
DE
ES
FI
FR
IT
NL
PL
PT
SV
TR
ZH