Dreame M12 Manual De Usuario página 14

How to Use
2. Start cleaning: Gently step on the brush cover and recline the appliance backwards.
Press the Power Switch
between the Auto mode and the Suction mode according to your needs.
Note:
•
Do not vacuum any foamy liquids.
•
If the appliance is in the upright position while working, the current task will be suspended.
•
The appliance is suitable for cleaning floors, marble, tiles and other hard surfaces.
•
Do not recline the appliance backwards more than 140° to prevent the appliance from leaking water.
•
When the appliance is in operation, do not lift it off the ground, move it, tilt it or lay it flat. Doing so may cause the
used water to flow into the motor.
3. Empty the Used Water Tank: Press the Used Water Tank release button to take out the
tank. Remove the tank cover and pour out the used water. Close the tank cover and re-
install the tank before use.
to start operating, press the Mode Switch
＜140°
2
1
tto switch
10 10
EN