Dreame M12 Manual De Usuario página 19

Care and Maintenance
EN
Cleaning the Tube and the Dirt Sensor
Remove the Used Water Tank, wipe the tube and the dirt
sensor with a wet cloth before use.
Cleaning the Dust Cup Assembly
* Cleaning the dust cup after each use or after the amount of dust in the cup reaches the MAX line is
recommended.
* Replacing the filter every 3 to 6 months is recommended.
1. Press the dust cup release button and
remove the cup.
3. Tap the filter gently or clean it with the
cleaning brush. Rinse the filter and the
dust cup with water.
15 15
2. Take out the filter and the cyclone
assembly from the dust cup, then empty
the cup.
4. Dry the filter and the dust cup
completely before use.
Note: To reduce the risk
of electric shock or injury,
do not rinse the cyclone
assembly with water.