Therabody TheraFace PRO Manual De Instrucciones página 6

Getting Started
Powering on the TheraFace PRO device
Push and hold the O N/O FF button to power on the
device and the OLED screen will turn on.
Switching Off
Push and hold the O N/O FF button again to switch the
device off and the OLED screen will be off.
Automatic Shut Off
If the device is not manually powered off by pressing the Power button, the
device will automatically shut off after 10 minutes of inactivity.
Basic getting started steps:
1. Start with a clean, dry face
2. Select and attach your desired
attachment ring
3. Turn on the device
4. Choose your settings
5. Get started
Note:
Make sure you turn off
the power on the device before
removing the rings.
E N
6