stayer M1010 Manual De Instrucciones página 14

Maintenance and Service
Maintenance and Cleaning
- Before any work on the machine itself, pull
the mains plug.
- For safe and proper working, always keep the
machine and ventilation slots clean.
If the machine should fail despite the care taken in man-
ufacturing and testing procedures, repair should be
carried out by an after-sales service centre for Stayer
power tools.
WARNING! Important instructions for connecting
a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to the fol-
lowing code:
Do not connect the blue or brown wire to the earth ter-
minal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this power tool, it must be
disposed of safely.
ENGLISH
13
Disposal
The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into
household waste!
According the European Guideline
2002/96/EC for Waste Electrical and
Electronic Equipment and its implemen-
tation into national right, power tools
that are no longer usable must be collected separately
and disposed of in an environmentally correct manner.
Declaration of Conformity
We declare under our sole responsibility that this
product is in conformity with the following standards or
standardization documents: UNE EN 60745-2-1:2011
according to the
2006/42/CE, 2004/108/CE, 2006/95/CE
Ramiro de la Fuente
Director Manager
13
provisions of the directives
January 5, 2015