HiBoost Hi10-EGSM Manual De Usuario página 22

Description des Ports de L'amplificateur
Single Band Booster
1. LCD 2. Booster's Status LED indicators
3. Control buttons 4. Set
5. Indoor antenna port 6. Outdoor antenna port
7. Power connector
Triple and Quintuple Band
1. LCD 2. LED indicators 3. Control buttons
4. Indoor antenna port 5. Built-in antenna port*
6. Set 7. Power connector
8. Outdoor antenna port
9. Wifi led 10. Bluetooth led
Introduction LCD
Une fois I'amplificateur allume, le gain et la puissance s'allument sur I'ecran. "Bande"- affiche la frequence de
travail.Vous trouverez ci-dessous la liste des frequences affichees correspondant aux reseaux supportes.
Dual Band Booster
1. LCD 2. Booster's Status LED indicators
3. Control buttons 9. Whip Antenna Port
4. Bluetooth/Wi-Fi LED indicators
5. Indoor antenna port 6. USB Port
7. Power connector 8. Outdoor antenna port
Hi10-3S/5S
1. Alarm LCD 2. Data LED
3. Wifi LED
4. Indoor antenna port 5. USB
6. Outdoor antenna port
7. Power connector
Frequence
NR700
LTE800
EGSM&UMTS900
DSM&LTE1800
WCDMA/UMTS2100
LTE2600
Ecran LCD
700 MHz
800 MHz
900 MHz
1800 MHz
2100 MHz
2600 MHz
22