HiBoost Hi10-EGSM Manual De Usuario página 7

Booster Ports' Description
Single Band Booster
1. LCD 2. Booster's Status LED indicators
3. Control buttons 4. Set
5. Indoor antenna port 6. Outdoor antenna port
7. Power connector
Triple and Quintuple Band
1. LCD 2. LED indicators 3. Control buttons
4. Indoor antenna port 5. Built-in antenna port*
6. Set 7. Power connector
8. Outdoor antenna port
9. Wifi led 10. Bluetooth led
LCD Introduction
After the booster is on, gain and power will light up on the screen.
"Band"- displays the working frequency. Find below the list of frequencies displayed corresponding to the supported
networks.
Dual Band Booster
1. LCD 2. Booster's Status LED indicators
3. Control buttons 9. Whip Antenna Port
4. Bluetooth/Wi-Fi LED indicators
5. Indoor antenna port 6. USB Port
7. Power connector 8. Outdoor antenna port
Hi10-3S/5S
1. Alarm LCD 2. Data LED
3. Wifi LED
4. Indoor antenna port 5. USB
6. Outdoor antenna port
7. Power connector
Frequency
NR700
LTE800
EGSM&UMTS900
DSM&LTE1800
WCDMA/UMTS2100
LTE2600
LCD Display
700 MHz
800 MHz
900 MHz
1800 MHz
2100 MHz
2600 MHz
7