Dc Connection Precautions; Installation Instructions - Schumacher Electric XJS22 Manual Del Usuario

4. iNSTANT POWER™ LOCATiON
from the battery will corrode and damage the Instant Power™.
4.3 Do not operate the Instant Power™ in a closed-in area or restrict the ventilation in any way.
5.

dC CONNECTiON PRECAUTiONS

5.1 Connect and disconnect the DC output clips only after setting all of the Instant Power™
switches to the "off" position (if applicable) and removing the AC plug from the electrical
outlet. Never allow the clips to touch each other.
5.2 Attach the clips to the battery and chassis, as indicated in the operating instructions.
6. ChARGiNG ANd AC POWER CORd CONNECTiONS
Pursuant to Canadian Regulations, use of an adapter plug is not allowed in Canada. Use
of an adapter plug in the United States is not recommended and should not be used.
7.

iNSTALLATiON iNSTRUCTiONS

Remove all cord wraps and uncoil the cables prior to using the Instant Power™.
8. FEATURES
1
2
8
13
17
12
11
15
RiSk OF ELECTRiC ShOCk OR FiRE.
6.1
120-volt circuit. The plug must be plugged into an outlet that
is properly installed and grounded in accordance with all local
codes and ordinances. The plug pins must fit the receptacle
(outlet). Do not use with an ungrounded system. NOTE:
4
3
5
6
7
10
14
19
RiSk OF EXPLOSiON ANd CONTACT WiTh
BATTERY ACid.
4.1
Locate the Instant Power™ as far away
from the battery as the DC cables permit.
4.2 Never place the Instant Power™
directly above the battery being jumped; gases
The Instant Power™ charger is for use on a nominal
1.
2.
3.
4.
9
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
16
15.
16.
17.
18.
19.
18
3
• •
Jump Start/USB On/Off Switch
USB Port
Built-In Work Light
Digital Display
Display Button
Work Light On/Off Switch
Inverter On/Off Switch
12 Volt DC Outlets
120 Volt AC Outlets
Compressor Hose
Compressor Gauge
Compressor/Inflator Switch
Inflator Port
Charger Plug
Wall Charger
Battery Clamps
Deflator Port
Adapters
Inflator Hose