POWERSUPPLY
Insertback-upbattery
The back-up batteries ensures that the
stored settings are not lost in the case of
a power failure.
1
Open the battery compartment by
pressing the area market and pushing
down the cover.
2
Observe the polarity marked on the
base of the battery compartment when
inserting the batteries (micro batteries,
2 x 1.5 V, LR3/ UM 4/ AAA).
3
Close the battery compartment.
_____________________________________________
Mainsoperation
Check that the mains voltage on the type
plate corresponds to your local mains
supply. If this is not the case, contact your
specialist dealer.
1
Plug the power adapter into the wall
socket.
Caution:
7
The mains plug is used to disconnect
the device It shall remain readily op-
erable and should not be obstructed
during intended use.
ENGLISH
1 1