Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance & Care Instructions
Maintenance & Power Saving
lf the electronic instant hot water appliance is not being used for long periods of time i.e. over
7 days, to save power we recommend you switch off the tank using the power switch on the
front of the tank.
Seasonal Shutdown
The hot water system (tank and tap) must not be exposed to freezing temperatures. lf there
is a possibility of this the system must be drained of water. Shut-off the mains supply and
unplug the unit from the electricity mains and allow the tank to cool for at least 1 hour.
Disconnect the inlet supply to the tank and remove the silicone hose outlet pipe, lift the unit
to the sink, turn upside down and drain all the water from the tank. When reinstalling follow
the original installation instructions.
Notice
This appliance dispenses 98°C water, fittings & pipework can get hot!
The electronic instant hot water appliance like any water heater has a limited operational life
span and will eventually fail. ln order to ensure maxim-um protection and to avoid possible
damage to any property or personal injury the electronic instant hot water appliance should
be inspected regularly for any water leakage or damage.
Regularly check for any signs of water leakage, if there is any water leakage then replace any
loose or split silicon tubes or flexi tails which can cause water leakage and damage.
To provide additional water security to avoid property damage the electronic instant hot water
appliance can be placed in a drain pan and connected to a suitable drain outlet to avoid
any water damage. The drain pan should be installed using the manufacturers installation
instructions.
Publicidad
