Publicidad
Idiomas disponibles
Idiomas disponibles
We are delighted that you have chosen our instant boiler and tap. This unique electronic
instant hot water appliance will save you time and effort when requiring near boiling water
for making tea and coffee and we are sure you will discover many new uses each day.
Please read and follow our step by step guide to the installation, operation and care for the
electronic instant hot water appliance and you will soon be making that first cup of coffee or
tea from your new appliance.
What you need to know
For your safety and satisfaction please read
all the instructions, cautions and warnings
before installing or using this electronic
instant hot water appliance.
This electronic instant hot water appliance
is not intended for industrial or intense
commercial use.
IMPORTANT NOTICE: This product can
cause harm if installed incorrectly and
should only be installed by a competent
person, if you feel for any reason unsure
about the installation please contact a
qualified plumber or electrician to install the
appliance.
Make sure all electrical wiring and
connections conform to local standards.
Make sure all water connections conform to
local standards.
Equipment Required
Adjustable Spanner
A standard 220/240v grounded 13 amp
switched electrical outlet is required under
the sink for the electronic instant hot
water appliance electrical power and must
supply electrical power continuously to the
appliance.
The power outlet must be connected to the
13amp fused plug supplied.
The instant hot water appliance is an
open vented system appliance when
not being operated the pressure is
1.0bar. The operating pressure is 1.5
bar to 5 bar.
The water filter must be connected to the
electronic instant hot water appliance.
Failure to change filter every 3-6 months
may invalidate your warranty.
Tape Measure
Publicidad
