fohen instanti Manual De Usuario página 9

6. Place the metal 3/8" to barb connection
on to the spigot coming from the
boiler marked in red. You must use the
washer provided. Note that the washer
may already be inside the 3/8" to barb
connector.
Then connect the metal 3/8" to 1/2"
connector on to the threaded spigot
coming from the boiler marked in blue.
You must use the washer provided. Note
that the washer may already be inside
the metal 3/8" to 1/2"connector.
Then connect the plastic 1/2" to push
fit connector on top of the metal 3/8"
to 1/2" connector. You must use the
washer provided. Note that the washer
may already be inside the plastic 1/2" to
push fit connector.
7. Connect the silicon hose to the barbed
connection on the spigot marked with
red. Secure with the securing clip.
Then push fit the PVC pipe into the push
fit connector on the spigot marked with
blue and into the filter.
Plastic 1/2" to
push fit connector
Metal 3/8" to
barb connector
Red Spigot
Blue Spigot
Silicon
hose
Securing
clip
Metal 3/8" to
1/2" connector
PVC
pipe