Descargar Imprimir esta página

Parkside PRMA 40-Li C1 Traduccion Del Manual De Instrucciones Originale página 29

Cortacésped recargable 40v

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 143
• Do not start the motor when
standing in front of the dis-
charge chute.
Caution! Danger! The blade
continues to run after switching
off. There is a risk of injury.
• The device must not be lifted or
transported while the motor is
running. Turn the device off if it
needs to be tilted for transport,
if surfaces other than lawn need
to be traversed, and while the
device is being brought to and
from the mowing terrain.
• Always keep the grass ejector
opening clean and free of de-
bris. Only remove cut material
when the device is at a standstill.
• Never leave the device unat-
tended at the workplace.
• Do not work with a damaged or
incomplete device or one which
has been converted without the
permission of the manufacturer.
Never use the device if the pro-
tection equipment or shielding
are damaged, or if the safety
equipment (deflector and/or
grass collection equipment) is
missing.
• Do not overload your device.
Only work within the power
range indicated and do not
modify the controller settings on
the motor. Do not use low-perfor-
mance machines for heavy work.
Do not use the device for purpos-
es for which it is not intended.
• Do not use the appliance near
flammable liquids or gases.
There is a risk of fire or explo-
sion if this advice is not heeded.
• Switch the device off, remove
the safety key and take out the
battery. Make sure that all mov-
able parts are stationary:
- whenever you leave the
apparatus unattended and
when it is not being used,
- before removing obstructions
or loosening blockages from
the discharge chute,
- before checking or cleaning
the apparatus or performing
any work on it,
- if a foreign object has been
hit by the device. Check for
damage to the apparatus
and carry out the necessary
repairs before switching it on
again and working with it,
• If the apparatus starts to vibrate
excessively, an immediate check
is required.
• Make sure that all nuts, bolts and
screws are properly tightened.
• Inspect the apparatus for any
damage.
• Have any necessary repairs car-
ried out on damaged parts.
• Do not bring your feet or hands
into the vicinity of rotating parts
(or beneath them). Never stand
in front of the grass ejector
opening.
• When starting or turning the
motor on, the lawnmower must
not be tilted, unless it is required
to lift the lawnmower in the
process. In this event, tilt it only
as far as absolutely necessary
and lift it only on the side facing
away from the user.
GB
MT
29

Publicidad

loading