Carrier WTC-RT Manual De Instalación

WTC-RT
Installation precautions
Introduction
Read the instructions carefully before
placing this device. The manufacturer
declines all responsibility for any
inconveniences or damages caused by not
complying with instructions given in this
manual. All warranty claims are void if
instructions provided in this manual are
not observed.
Only qualified installers should be
■
allowed to install and service the
equipment.
All instructions provided in this
■
manual should be read and followed.
Incoming equipment should be
■
carefully checked for possible damage
caused during transport or by incorrect
handling. In case of damage, file a
claim with the transport company.
All manuals and user guides at all-guides.com
Remote Temperature
WTC-RT / WTC-RCI
Installation instructions
WTC-RCI-S WTC-RCI-SF
Package contents
■
■
WTC-RCI-SOF
General installation requirements
After the installation, carry out a
■
complete system check and explain all
system functions to the user.
Dispose of all packaging materials in
■
accordance with all applicable local
regulations.
Take precautions to prevent
■
electrostatic discharge to the device
when installing, servicing or operating
the equipment.
Environmental
Storage temperature: -20 to 50°C
Relative humidity: 0 to 95% non-condensing
Operating temperature: 5 to 40°C
User interface
End-user manual
1