Descargar Imprimir esta página

Urmet 1760 Manual De Uso página 18

Videointerfono 7”
Ocultar thumbs Ver también para 1760:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
1.16
MUTE FUNCTION ACTIVATION
• In the video door phone area say the voice command "Hey Urmet".
• Then say one of the following voice commands:
– "Silent mode"
– "Disable ringing"
– "Do not disturb"
The video door phone says the following voice message "Silent mode on" to confirm the reception of
the voice command.
1.17
MUTE FUNCTION UNSETTING
• In the video door phone area say the voice command "Hey Urmet".
• Then say one of the following voice commands:
– "Ring mode"
– "Enable ringing"
– "Ring"
The video door phone says the following voice message "Ring mode on" to confirm the reception of the
voice command.
1.18
"NOT AT HOME" MODE
The following voice command allows changing the status of the video door phone to one of the following
modes:
At Home, Message Service (default), Remote and Diversion. Using the voice command you can, for
example, set the "Remote" status so as to receive calls on your smartphone via CallMe app when you
are not at home. It is also possible to combine the activation of a Button or a Yokis scenario, for example
turning off the lights (for more details, see paragraph "Voice command parameters
• In the video door phone area say the voice command "Hey Urmet".
• Then say one of the following voice commands:
– "I'm going out"
– "Going out"
– "I'm leaving"
The video door phone says the following voice message "Goodbye" to confirm the reception of the voice
command and changes the status according to the configuration made.
1.19
"AT HOME" MODE
The following voice command allows changing the status of the video door phone to one of the following
modes:
At Home, Message Service (default), Remote and Diversion. Using the voice command you can, for
example, set the "At Home" status so as not to receive calls on your smartphone via CallMe app when
you are at home. It is also possible to combine the activation of a Button or a Yokis scenario, for example
turning on the lights (for more details, see paragraph
• In the video door phone area say the voice command "Hey Urmet".
• Then say one of the following voice commands:
– "I have returned"
– "I'm back"
– "I'm home"
The video door phone says the following voice message "Welcome back!" to confirm the reception of
the voice command and changes the status according to the configuration made.
18
"Voice command parameters
configuration").
configuration").
DS1760-037

Publicidad

loading

Este manual también es adecuado para:

1760/311760/31a