Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Restore electrical power to the outlet box by turning
the electricity on at the main fuse box. (Figure 1)
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not operate
fan until the blades are in place. Noise and fan damage
could result.
2.
Install the fan pull chain and light kit pull chain.
(Figure 2)
3.
Check the operation of the fan by gently pulling on
the fan pull chain. (Figure 3)
Fan Pull Chain Operating Sequence
st
1
Pull
nd
2
Pull
rd
3
Pull
th
4
Pull
4.
Slide the switch to "CH" when use the pull chain of
light kit. Slide the switch to "RC" while the fan is using
with optional remote control-CR500 accessory.
(Figure 4)
5.
Check the operation of the light by gently pulling on
the light kit pull chain. (Figure 5)
Light Kit Pull Chain Operating Sequence
st
1
Pull
nd
2
Pull
rd
3
Pull
th
4
Pull
How to Operate Your Ceiling Fan
High
Medium
Low
Off
On
Begins dimming
Stop dimming
Off
Light Kit Pull Chain
Light Kit
Light Kit Pull Chain
16
Main Fuse Box
Figure 1
Fan Pull Chain
Figure 2
Fan Pull Chain
Figure 3
Figure 4
Figure 5
Publicidad
