Publicidad
Idiomas disponibles
Idiomas disponibles
Adjustable Harness Buckle
1
- The harness buckle may be adjusted for improved comfort or fit of any child. Loosen
harness, open the chest clip and harness buckle. Lift up on the lower section of the head
support pad (1).
2
- Locate and undo 2 snap buttons on the seat back pad.
3
- Remove the harness buckle from the seat pad, and pull forward on the seat back pad.
4
- Locate the harness buckle adjustment slots in the seat shell and squeeze/pinch the
sides of the harness buckle strap together. Drop the pinched strap slightly to allow it to
pass between the positions.
5
- Slide the harness buckle strap forward or rearward (as shown) to best fit your child.
Use the position that is closest to (but not under) your child.
6
- Insert the harness buckle back into the correct seat pad opening. Reattach both seat
back pad snap buttons, and pull down on the lower section of the head support pad.
The infant insert (p.26) is for use with infants who weigh between 5–11 lb (2.3–5 kg). DO
NOT use the insert for a child who weighs more than 11 lb.
24
REVV
instructions
™
1
2
4
5
3
6
REVV
™
instructions
25
Publicidad
