Publicidad
Idiomas disponibles
Idiomas disponibles
If using lower anchor belt
The lower anchor belt and connectors are stored in the lower anchor storage at the back
of the child restraint.
WARNING: Do not install by this method for a child weighing more than 35 lb (15.9 kg)
rear facing. The lower anchors can be used forward facing till the maximum weight limit of
the seat (40 lb [18 kg]).
1
- Attach the tether hook loosely to the vehicle tether anchor.
2
- Lengthen lower anchor belt for use by pressing adjuster button (p.34) while pulling on
belt. Attach one of the lower anchor connectors.
3
- Route the other end of the lower anchor belt across the anti-rebound panel and under the
True Tension
door. If possible, secure the lower anchor belt under the belt positioner.
™
4
- Attach the other lower anchor connector.
5
- Check the lower anchor belt, make sure it is not twisted and is laying flat across the
rebound panel.
6
- While pushing down firmly on the car seat, pull up on the lower anchor adjuster strap
to remove the slack.
50 REVV
™
instructions
1
2
5
4
3
6
REVV
™
instructions
51
Publicidad
