Publicidad
Idiomas disponibles
Idiomas disponibles
Softgoods Removal (cont.)
Seat Cover
1
- Move the head support to the lowest position.
2
- Undo seat pad snap buttons on the inside of the seat. Pull the harness buckle through
the seat cover and place the harness straps in the seat shell.
3
- Undo 2 side snap buttons on the seat cover, and repeat for the other side.
4
- Pull forward on the front edge of the seat cover fabric and release both fabric
stiffeners.
5
- Locate the side impact protection pod and pull down on the bottom edge. Guide the
fabric opening around and off the impact protection pod; repeat for the other side.
6
- Lift up on the seat cover and remove it from the car seat shell.
Nuna Baby Essentials, Inc. Nuna and all associated logos are trademarks.
66 REVV
™
instructions
1
2
4
5
3
6
REVV
™
instructions
67
Publicidad
