Pride Mobility BAJA Bandit Manual De Usuario página 21

V. C O M F O R T A D J U S T M E N T S
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to diff erent heights. See fi gure 13.
1. Remove the seat and battery pack from your vehicle.
2. Use the attached ring to pull and remove the detent pin from
the lower seat post.
3. Raise or lower the upper seat post to the desired seat height.
4. While holding the upper seat post at that height, align the
adjustment holes of the upper and lower seat posts.
5. Fully insert the detent pin.
6. Replace the battery pack and seat.
®
Mobility BA140
BAJA
IDENTIFICATION KEY
1. Upper Seat Post
2. Lower Seat Post
3. Detent Pin
Figure 13. Seat Height Adjustment
1
2
3
21