Functional Description - Makita 4100NH Manual De Instrucciones

Ocultar thumbs Ver también para 4100NH:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Symbols
The followings show the symbols used for tool.
volts
amperes
hertz
alternating current
rated speed
no load speed
Class II Construction
revolutions or reciprocation per minute
FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the tool is switched off and
unplugged before adjusting or checking function
on the tool.
Adjusting the depth of cut
► 1. Wing bolt 2. Base
Loosen the wing bolt on the depth guide and move the
base up or down. At the desired depth of cut, secure the
base by tightening the wing bolt.
CAUTION:
After adjusting the depth of cut, always tighten
the wing bolt securely.
Sighting
Align the edge of the front of the base with your cutting
line on the workpiece.
Switch action
CAUTION:
Before plugging in the tool, always check to see
that the switch trigger actuates properly and
returns to the "OFF" position when released.
► 1. Switch trigger 2. Lock-off button
To prevent the switch trigger from being accidentally
pulled, a lock-off button is provided. To start the tool,
push in the lock-off button and pull the switch trigger.
1
Release the switch trigger to stop.
ASSEMBLY
2
CAUTION:
Always be sure that the tool is switched off and
unplugged before carrying out any work on the
tool.
5 ENGLISH
1
2

Publicidad

Tabla de contenido
loading

Tabla de contenido