Publicidad
Idiomas disponibles
Idiomas disponibles
4. Adjust the lifting arms so that the vehicle is positioned with its center of gravity in the middle between
the pillars. Adjust the height of the support plates so that they reach the lifting points specified by the
manufacturer; if necessary, use the required support plate adapters.
Attention
Observe the maximum height of 250 mm or the maximum height of a support plate
adapter.
Lifting the vehicle
1. Turn on the main switch of the lifting platform.
2. Raise the vehicle by pressing the "Lift" button until the vehicle is raised to a height of 100-150 mm.
3. Check again that the vehicle is secure and that all locking bolts are engaged.
4. Always make sure the safety devices are engaged before attempting to work on or near the vehicle.
Parking position
1. From a height of 500 mm, the safety detent automatically engages.
2. Pressing the Park button lowers the lift to the next notch. Ensure that the height is uniform.
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
110
Release date: 18.08.2023 / Product manufacturer ATH-Heinl GmbH & Co. KG
Publicidad
