Publicidad
Idiomas disponibles
Idiomas disponibles
The maximum or minimum pressure ensures proper function without possible damage.
2.9
Hydraulic connection
Before the system is put into operation or operated with oil for the first time, the following must be
observed with regard to optimum, trouble-free and virtually air-free operation:
All hydraulic lines according to hydraulic plan, if necessary according to hose designation, must be connected
and tightened.
All hydraulic lines and cylinders must be vented according to the hydraulic plan or hose designation.
In order to ensure the proper and safe functioning of the system and the hose lines used, it is essential to
ensure that the hydraulic fluids used comply with the specific specifications and recommendations of the
manufacturer.
Used media that do not meet the specific requirements or show unauthorized contamination will damage the
entire hydraulic system and shorten the service life of the hydraulic systems used.
Note
A contamination of the plant is also possible by a new filling with oil.
The minimum requirement and minimum oil quantity must be checked or produced.
2.10
Assembly
Note
These instructions are not to be seen as assembly instructions, only hints and help are given
here for knowledgeable and skilled assemblers.
Warning
Appropriate clothing and individual protective devices must be worn for the following work.
Caution
Incorrect assembly and adjustments will result in exclusion of liability and warranty.
Partially pre-assembled machines must be inspected, instructed and accepted by a competent person before
commissioning.
Assembly of machines must be carried out by a skilled and qualified person.
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
90
Release date: 18.08.2023 / Product manufacturer ATH-Heinl GmbH & Co. KG
Publicidad
