Publicidad
Idiomas disponibles
Idiomas disponibles
Lay the compensating ropes according to the illustration.
Make sure that the ropes run over the deflection pulleys.
Use the M14 nuts to adjust the tension of the compensation ropes evenly.
Depending on the selected mounting height of the crosshead, use one of the supplied compensation rope
adapters.
Mount the roller cover to each column with an M6x10 screw.
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
99
Release date: 18.08.2023 / Product manufacturer ATH-Heinl GmbH & Co. KG
Publicidad
