2
INSTALLATION
The machine must be installed by authorized personnel in accordance with the instructions.
Note
The operating instructions (including protocol) are an important part of the machine or
product.
Please keep it in a safe place!
The product must be inspected by a suitable and authorized company or institution after completion of
assembly, handover, instruction if necessary, and subsequently at regular intervals in accordance with the
regulations and legal provisions in force in the country of operation.
2.1
Transport and storage conditions
For transport and positioning of the machine always use suitable slinging, lifting or floor conveying equipment
and pay attention to the center of gravity of the machine.
The machine should only be transported with the original packaging.
Data
Weight
Width
Length
Height
Storage temperature
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
Release date: 18.08.2023 / Product manufacturer ATH-Heinl GmbH & Co. KG
ATH Comfort Lift 2.55XL
1210 kg
1066 mm
3148 mm
905 mm
-10 to +50°C
85