Setting The Dialing Mode; Base Reset - Topcom SOLOGIC B935 Manual De Usuario

• Press the up or down key
• Press 'Select' to confirm.
• Press the up or down key
• Press 'Select' to confirm.
• Select
– 'Flash-1': (short) to have a flash of 100ms
– 'Flash-2': (long) to have a flash of 300ms
• Press 'Save'
13
saving.
12.2 Changing the PIN code (system PIN code)
Certain functions are only available if you know the PIN code of the base.
The PIN code has 4 digits. The default PIN code setting is '0000'. If you would like to change
the PIN code and set your own secret code, do the following:
• Press the left 'Menu' key.
• Press the up or down key
• Press 'Select' to confirm.
• Press the up or down key
• Press 'Select' to confirm.
• Enter the current pin and press 'Next'.
• Enter the new pin and press 'Next'.
• Enter the new pin again and press 'Save'
leave the menu without saving.

12.3 Setting the dialing mode

There are two types of dialing modes that can be used on a telephone line:
• DTMF/Tone dialing (the most common)
• Pulse dialing (for older installations)
To change the dialing mode:
• Press the left 'Menu' key.
• Press the up or down key
• Press 'Select' to confirm.
• Press the up or down key
• Press 'Select' to confirm.
• Use the up or down key
• Press 'Save'
13

12.4 Base reset

You can restore all Base settings back to default.
To restore the default settings:
• Press the left 'Menu' key.
• Press the up or down key
• Press 'Select' to confirm.
• Press the up or down key
• Press 'Select' to confirm.
• Enter the pin code (0000).
Sologic B935
/
15
/
15
to confirm your selection or press 'Back'
/
15
/
15
/
15
/
15
/
15 7
to confirm or press 'Back'
/
15
/
15
7 repeatedly until 'BS Settings' is selected.
repeatedly until 'Flash Time' is selected.
7
repeatedly until 'BS Settings' is selected.
7
7 repeatedly until 'Modify PIN' is selected.
to store the new pin or press 'Back'
13
7 repeatedly until 'BS Settings' is selected.
7 repeatedly until 'Dial mode' is selected.
to select 'Tone' or 'Pulse'.
to leave the menu without saving.
5
7 repeatedly until 'BS Settings' is selected.
repeatedly until 'BS Reset' is selected.
7
Sologic B935
5 to leave the menu without
5 to
21