System Master Sheet; Manufacturer; Purpose; Changes To The Design / Construction - ATT Nussbaum JUMBO LIFT 3200 NT Instrucciones De Servicio

9

System master sheet

9.1

Manufacturer

Otto Nußbaum GmbH & Co.KG
Korker Straße 24
D-77694 Kehl-Bodersweier
9.2

Purpose

The JUMBO LIFT 3200 NT - HYMAX 3200 PH lift is a lift for cars up to a total weight of 3,200 kg in normal
work shop operations and a maximum load distribution of 3:2 or 2:3 in the drive-in direction or against the
drive-in direction.
Additionally, there is a distinction between cars operated with front or rear drive.
Set up of the standard lift in explosion endangered workshops or humid work shops (e.g. outside and
washing halls) is prohibited. After construction and significant maintenance changes on load carrying
parts the lift must be inspected afterwards by a specialist who approves the changes.
Operation of the lift is done by an operating unit that is located immediately next to the lift.
9.3

Changes to the design / construction

Inspections by a technical expert are required before recommissioning (date, type of change, technical
expert signature).
..................................................................................................................................................................................
..................................................................................................................................................................................
Name, address of technical expert
................................................................................
Location, date
9.4

Changing the assembly location

Inspections by a technical expert are required before recommissioning (date, type of change, specialist
signature).
..................................................................................................................................................................................
..................................................................................................................................................................................
Name, address of technical expert
................................................................................
Location, date
58
............................................................................................
Technical expert signature
............................................................................................
Technical expert signature
JUMBO LIFT 3200 NT - HYMAX XX 3200 PH Version 1.0 20110009 OPI