About The Liquid Crystal Display; Error Messages; List Of Icons Displayed On The Main Unit Display Section - Pioneer CDJ-2000 Manual De Instrucciones

Problem
PRO DJ LINK does not work well.

About the liquid crystal display

! Small black or shining points may appear on the liquid crystal display. This is a phenomenon inherent to liquid crystal displays; this is not a malfunction.
! When using in cold places, the liquid crystal display may be dark for a while after the CDJ-2000's power is turned on. It will reach the normal brightness after a while.
! When the liquid crystal display is exposed to direct sunlight, the light will reflect off it, making it difficult to see. Block the direct sunlight.

Error messages

When the CDJ-2000 cannot operate normally, an error code appears on the display. Take the necessary measures, referring to the table below. If an error code not
indicated on the table below is displayed or if the same error code appears after the indicated action has been taken, contact your store of purchase or nearby Pioneer
service station.
Error code Error type
E-7201 TOC READ ERROR
E-8301
E-8302 PLAYER ERROR (XXXX)
E-8303
E-8304 DECODE ERROR
E-8305 DATA FORMAT ERROR
E-8306 NO FILE
E-9101 MECHANICAL TIME OUT

List of icons displayed on the main unit display section

Genre
Artist
Album
Track/ file name
Playlist
HISTORY
Hot Cue Bank
List
Rating
Time
Check
Are the player numbers properly set?
Is the LAN cable properly connected?
Is the switching hub's power turned on?
Is an unnecessary device connected to the switching hub?
Description of error
TOC data cannot be read.
Disc that cannot be played normally is loaded.
Music files that cannot be played normally are
loaded.
Track recorded in the library, playlist, etc., has been
deleted from the SD memory card/ USB device and
cannot be played.
Mechanical error (time out) during loading or eject-
ing of disc.
Player number
Disc
(1 – 4)
Registered in
Label
tag list
Tempo (BPM) Key
Color Bit rate
USB Playing
SD Open folder
Computer Close folder
Remedy
Set [PLAYER No.] to [AUTO] or to a number different from the number cur-
rently set. (page 21)
Connect the LAN cable properly to the [LINK] terminal.
Turn the switching hub's power on.
Disconnect the unnecessary device from the switching hub.
Cause and action
!
Disc is cracked.dReplace the disc.
! Disc is dirty.dClean the disc.
! If operation is normal with other discs, the problem is with that disc.
Format is wrong.dReplace with music files in the proper format.
Do not delete that track from the SD memory card/ USB device.
Displayed when mechanism operation is not completed within the specified
time.
File type
Year
Remixer name
Original artist
Search
DJ play count
Date library added
Sampling rate
Comment
WAIT
rekordbox
27
En