About The Driver Software; Installing The Driver Software - Pioneer CDJ-2000 Manual De Instrucciones

! When you make an inquiry about rekordbox, be sure to provide us the
information on the model name, specifications (CPU and memory capacity and
peripheral devices connected), and operating system version of your computer,
as well as specific descriptions of system malfunction.
— For an inquiry about configuring your computer with peripheral devices
other than our products and the corresponding technical support, contact
each manufacturer or retailer.
! rekordbox is subject to upgrade for enhanced function and performance.
The upgrade program can be downloaded on the support site. We strongly
recommend you upgrade your software on a regular basis to keep the latest
updates on your system.

About the driver software

This driver software is an exclusive ASIO driver for outputting audio signals from
the computer. To use the CDJ-2000 connected to a computer on which Windows
is installed, install the driver software on the computer beforehand.
When using a computer on which a MAC operating system is installed, use the
operating system's standard driver software.
Software end user license agreement
Carefully read the provisions of the Software end user license agreement (page
22) before installing or using the driver software. Using the driver software
implies that you have consented to the Software end user license agreement.
Cautions on Installation
! Before installing the driver software, be sure to turn off the power of this unit
and disconnect the USB cable from both this unit and your computer.
! If you connect this unit to your computer without installing the driver soft-
ware first, an error may occur on your computer depending on the system
environment.
! If you have discontinued the installation process in progress, step through
the installation process again from the beginning according to the following
procedure.
! Carefully read the provisions of the Software end user license agreement
before installing the driver software for exclusive use with this unit.
! Before installing the driver software, terminate all other programs running on
your computer.
! The driver software is compatible with the following OSs.
— Windows ®
7 Home Premium/ Professional/ Ultimate
— Windows Vista ®
Home Basic/ Home Premium/ Business/ Ultimate (SP1 or
later)
— Windows ®
XP Home Edition/ Professional (SP3 or later)
When using a 64-bit version of Windows
applications can be used.
®
Windows XP Professional x64 Edition is not supported.
! The included CD-ROM includes installation programs in the following 12
languages.
English, French, German, Italian, Dutch, Spanish, Portuguese, Russian,
Simplified Chinese, Traditional Chinese, Korean, and Japanese
If the language of your OS is one other than the ones listed above, select
[English] following the instructions on the screen.

Installing the driver software

! Carefully read "Cautions on Installation" before installing the driver software.
! To install or uninstall the driver software, you need to be authorized by the
administrator of your computer. Log on as the administrator of your computer
before proceeding with the installation.
1 Insert the included CD-ROM into the computer's CD drive.
The CD-ROM menu is displayed.
! If the CD-ROM menu does not appear when the CD-ROM is inserted, open
the CD drive from [Computer (or My Computer)] in the [Start] menu, then
double-click the [CD_menu.exe] icon.
24
En
® ®
7 or Windows Vista , only 32-bit
2 When the CD-ROM's menu is displayed, select [Install Driver
Software], then click [Start].
To close the CD-ROM menu, click [Exit].
3 Proceed with installation according to the instructions on the
screen.
If [Windows Security] appears on the screen while the installation is in progress,
click [Install this driver software anyway] and continue with the installation.
! When installing on Windows XP
If [Hardware Installation] appears on the screen while the installation is in
progress, click [Continue Anyway] and continue with the installation.
! When the installation program is completed, a completion message appears.
Connecting the CDJ-2000 and computer
1 Connect this unit to your computer via a USB cable.
2 Press [POWER].
Turn on the power of this unit.
! The message [Installing device driver software] may appear when the CDJ-
2000 is connected to the computer for the first time or when it is reconnected
to the computer's USB port. Wait until the [Your devices are ready for use]
message appears.
! When installing on Windows XP
— [Can Windows connect to Windows Update to search for software?]
may appear while the installation is in progress. Select [No, not this
time] and click [Next] to continue with the installation.
— [What do you want the wizard to do?] may appear while the instal-
lation is in progress. Select [Install the software automatically
(Recommended)] and click [Next] to continue with the installation.
— If [Hardware Installation] appears on the screen while the installation is
in progress, click [Continue Anyway] and continue with the installation.
Adjusting the buffer size (Windows)
This unit functions as an audio device conforming to the ASIO standards.
! If an application using this unit as the default audio device (DJ software, etc.)
is running, quit that application before adjusting the buffer size.
Click Windows [Start] menu > [All Programs] > [Pioneer] > [Pioneer
CDJ] > [Pioneer CDJ ASIO Settings Utility].
! A sufficiently large buffer size decreases the chance of sound dropout (sound
interruption) but increases audio signal transmission delay (latency).
! For the bit number, specify the bit depth during ASIO playback.
! To specify "24 bit" for the bit number, the firmware must be updated to ver-
sion 3 or later.