Mounting The Surface-Mount Ex D Beacon; Figure 4 Bracket Dimensions; Figure 5 Front View Of Ex D Beacon; Figure 6 Side View Of Ex D Beacon - Federal Signal Global G-STR Instrucciones De Instalación Y Mantenimiento

Installation and Maintenance Instructions

Mounting the Surface-Mount Ex d Beacon

Mount the beacon to a flat surface using the four 8.5 mm mounting
holes. Use installer-supplied fasteners suitable for the surface to
which the device will be mounted.
105.9 mm
(4.17 in
10
All manuals and user guides at all-guides.com

Figure 4 Bracket dimensions

60.0 mm
(2.36 in)

Figure 5 Front view of Ex d beacon

105.9 mm (4.17 in

Figure 6 Side view of Ex d beacon

227.4 mm (8.95 in)
2X M20 GLAND ENTRIES
Model G-STR Global Series Strobe Beacon
2X M6 SCREW HOLE
Ø105.9 mm (5.27 in)
4X COUNTER-BORED
HOLES TO FIT M8
SOCKET-HEAD
CAP SCREWS
)
31.8 mm
(1.25 in)
132.6 mm
(5.22 in)
34.9 mm
(1.38 in)