Federal Signal Global G-STR Instrucciones De Instalación Y Mantenimiento página 20

Installation and Maintenance Instructions
• The nameplate, which may contain cautionary or other information
of importance to maintenance personnel, should NOT be obscured
in any way. Ensure that the nameplate remains readable.
• After performing any maintenance, test the beacon system to
ensure that it is operating properly.
Failure to follow all safety precautions and instructions may result in
property damage, serious injury, or death.
Maintaining the Beacon
EXPLOSION HAZARD: To prevent ignition of hazardous
atmosphere, disconnect the beacon from the supply circuit before
opening it. Do not open the beacon in the presence of explosive
gases in the atmosphere. Failure to follow this warning may result
in serious injury or death.
During the working life of the beacon, it should require little or no
maintenance. The non-metallic housing will resist attack by most
acids, alkalis, and chemicals and is as resistant to concentrated acids
and alkalis as most metal products. However, if abnormal or unusual
environment conditions occur due to plant damage or accident, etc.,
visual inspection of the beacon is recommended.
Cleaning the Enclosure
The enclosure should be cleaned periodically with a damp cloth to
maintain maximum light output. The polycarbonate colored strobe
lens should be regularly inspected for cracks. If it is damaged, it
must be replaced.
Refer to the "Certification" section on page 6 for any applicable
Specific Conditions of Use.
Replacing the Strobe Tube
EXPLOSION HAZARD: To maintain the flameproof integrity
of the enclosure, DO NOT damage the lens or threads while
disassembling or reassembling the beacon.
20
All manuals and user guides at all-guides.com
Model G-STR Global Series Strobe Beacon