GRAPHITE 58G876 Instrucciones De Uso página 14

All faults should be repaired by service workshop authorized by the manufacturer.
RATED PARAMETERS
Parameter
Supply voltage
Current frequency
Rated power
Impact rate
Impact energy
Chuck type
Protection class
Weight (w/o accessories)
Year of production
58G876 stands for both the type and designation of the machine
NOISE LEVEL AND VIBRATION PARAMETERS
Sound pressure Lp = 89 dB(A) K = 3 dB(A)
A
Sound power Lw = 105 dB(A) K = 3 dB(A)
A
Vibration acceleration (front handle) a
Vibration acceleration (rear handle) a
nformation regarding noise and vibration
The following levels of emitted noise, such as emitted acoustic pressure LpA and acoustic power level LwA and
measurement uncertainty K have been given in the instruction manual as defined in the EN 60745 standard.
The following vibration value (acceleration value) ah and measurement uncertainty K have been determined as
defined in the EN 60745 -2-6 standard.
The vibration level provided in this instruction manual have been determined according to the measurement
procedure as defined in the EN 60745 standard and can be used for comparison of power tools. This can be used
for preliminary assessment of exposure to vibrations.
The provided vibration level is representative for main applications of the power tool. If the power tool is used
for other applications or with other working tools, and if it is not sufficiently maintained, the vibration level may
vary. The aforementioned reasons may increase the exposure to vibrations during the entire operating period.
In order to precisely estimate the exposure to vibrations, periods should be accounted for, in which the power
tool is switched off, or when it is switched on, but not operated. Thus, the total exposure to vibration may prove
considerably lower.
Additional safety measures should be taken to protect the user against effects of vibrations, such as: maintenance
of the power tool and its working tools, ensuring proper temperature of the hands and proper organisation of
work.
Do not dispose of electrically powered products with household wastes, they should be utilized in
proper plants. Obtain information on waste utilization from your seller or local authorities. Used up
electric and electronic equipment contains substances active in natural environment. Unrecycled
equipment constitutes a potential risk for environment and human health.
* Right to introduce changes is reserved.
"Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa with seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa Topex)
informs, that all copyrights to this instruction (hereinafter Instruction), including, but not limited to, text, photographies, schemes, drawings and
layout of the instruction, belong to Grupa Topex exclusively and are protected by laws accordingly to Copyright and Related Rights Act of 4 February
2004 (ustawa o prawie autorskim i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later ammendments). Copying, processing, publishing,
modifications for commercial purposes of the entire Instruction or its parts without written permission of Grupa Topex are strictly forbidden and may
cause civil and legal liability.
TECHNICAL PARAMETERS
Demolition Hammer 58G876
= 10,325 m/s K = 1,5 m/s
2
h
= 13,304 m/s K = 1,5 m/s
2
h
ENVIRONMENT PROTECTION
14
Value
230 V AC
50 Hz
1200 W
3550 spm
15 J
SDS Max
II
6.7 kg
2021
2
2