RS Pro RS-3381 Manual De Instrucciones página 3

50000 count TRMS heavy Duty AC/DC clamp meter with
dual Type K inputs / English
SAFETY NOTES
• Do not exceed the maximum allowable input range of any function.
• Do not apply voltage to meter when resistance function is selected.
• Set the function switch OFF when the meter is not in use.
• Remove the battery if meter is to be stored for longer than 60 days.
WARNINGS
• Set function switch to the appropriate position before measuring.
• When measuring volts do not switch to current/resistance modes.
• Do not measure current on a circuit whose voltage exceeds 600V.
• When changing ranges always disconnect the test leads from the circuit under test.
CAUTIONS
• Improper use of this meter can cause damage, shock, injury or death. Read and understand this user
manual before operating the meter.
• Always remove the test leads before replacing the battery or fuses.
• Inspect the condition of the test leads and the meter itself for any damage before operating the meter.
Repair or replace any damage before use.
• Use great care when making measurements if the voltages are greater than 25VAC rms or 35VDC.
These voltages are considered a shock hazard.
• Always discharge capacitors and remove power from the device under test before performing Diode,
Resistance or Continuity tests.
• Voltage checks on electrical outlets can be difficult and misleading because of the uncertainty of
connection to the recessed electrical contacts. Other means should be used to ensure that the terminals
are not "live".
• If the equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
• This device is not a toy and must not reach children's hands. It contains hazardous objects as well as
small parts that the children could swallow. In case a child swallows any of them, please contact a
physician immediately
• Do not leave batteries and packing material lying around unattended; they can be dangerous for children
if they use them as toys
• In case the device is going to be unused for an extended period of time, remove the batteries to prevent
them from draining
• Expired or damaged batteries can cause cauterization on contact with the skin. Always, therefore, use
suitable hand gloves in such cases
• See that the batteries are not short-circuited. Do not throw batteries into the fire.
• Do not directly view or direct the laser pointer at an eye. Low power visible lasers do not normally
present a hazard, but may present some potential for hazard if viewed directly for extended periods of
time.
2
Function
A AC,
A DC
V DC, V AC
Resistance, Capacitance, Frequency, Diode Test
μA
Type K Temperature
3. Description
Meter Description
1-Current clamp
2-Clamp opening trigger
3-HOLD/BACKLIGHT button
4-MODE / °C/ °F
5-Backlit LCD Display
6-Type K input jacks
7-Multimeter input jacks
8-Non-Contact Voltage Detector
9-LAMP
10-NCV LED indicator
11-LAMP/ZERO button
12-Function switch
13-MAX/MIN button
14-RANGE/PEAK / Thermocouple display button
15-Input shutter
rspro.com rspro.com
50000 count TRMS heavy Duty AC/DC clamp meter with
dual Type K inputs / English
Maximum Input
1000A DC/AC
1000A DC/AC
600V DC/AC
250V DC/AC
4000μA
30V DC, 24V AC
1
CAT III I
600V
Non–Contact
Voltage–Delector
2
AUTO
POWER
OFF
CA P
3
HOLD
4
MODE MAX
MIN
5
AC/DC TRMS CLAMP METER
6 T1 T ype-K
V
COM
7 Temp mA µA
8
MAX
1000A
9
10
11
12
13
14
RANGE
PEAK
T2
15
Hz% CAP
3