Hella Gutmann MT-HV Manual De Instrucciones página 47

Hella Gutmann
5
6
7
8
9
10
11
MT-HV
Name
USB-C interface
Ethernet interface
Power supply socket
Connect a power adapter to the power supply socket to supply the MT-HV with voltage and to
charge the internal battery.
High-voltage
This LED indicates if e.g. a high-voltage measurement process is active or if high voltage is ap-
plied to the test prods (e.g. in case of insulation resistance measurement).
The different status indications are explained in the section User Communication [} 49].
Battery status
This LED indicates the various battery charging states.
The different battery status display are explained in the section User Communication [} 49].
Update
This LED indicates that an update is in progress.
Bluetooth®
This LED indicates that the MT-HV is connected via Bluetooth®.
Device description | 4.
47