Hella Gutmann MT-HV Manual De Instrucciones página 48

4. | Device description
12
13
14 / 15
16
17 / 18
48
Name
MT-HV status
This LED indicates e.g. if the MT-HV is active or ready for operation.
The different status indications are explained in the section User Communication [} 49].
ON/OFF button
Switch the MT-HV on and off with the ON/OFF button.
Name
Ports Scope 2 (CH2)
Connect the test leads to Scope 2 (CH2) here.
• red = signal +
• black = signal -
ST3 connector
Connect the blue and the green clamp meter here.
Ports Scope 1 (CH1)
Connect the test leads to Scope 1 (CH1) here.
• blue = signal +
• black = signal -
Hella Gutmann
MT-HV