Maxeon SunPower Reserve Instrucciones De Instalación página 60

TIP
9.2.3. Battery Protection Description
The three LED indicators on the battery front cover provide information about the protection
status of the battery with lights displaying solid yellow or flashing.
Symbol Description
Flashing yellow LED
On yellow LED
Off LED
LED In- Protec-
dicator tion No.
Yellow 1
LEDs
on or
Yellow
LEDs
2
flash
once per
second
3
4
5
6
7
8
© 2023 Maxeon Solar Technologies, Ltd. All rights reserved. | 547143 Revision B - June 2023
Specifications included in this document are subject to change without notice
1. The four LEDs in the first row are system (SYS), battery (BAT), meter
(METER), and communication (COM);
2. The five LEDs in the second row are divided into two functions:
• Battery SOC power display
• When a fault occurs, the corresponding fault code will be displayed.
LED Display Description
Temperature
difference
High
temperature
Low
temperature
discharge
Over-current
charge
Over-current
discharge
Cell overvoltage
Cell under
voltage
Low
temperature
charge
Troubleshooting
Wait for automatic recovery. If the
problem is not solved yet, please call
the service center.
Stop discharging and charging until
this display state is eliminated and
wait for the temperature to drop.
Stop discharging until this display
state is eliminated and wait for the
temperature to rise
Wait for automatic recovery. If the
problem is not be solved yet, please
call the service center.
Stop discharging and call the service
immediately.
Stop discharging until this display
state is eliminated and wait for the
temperature to rise.
59