Brother STELLAIRE INNOV-IS XJ1 Guia De Instalacion página 4

d
Insert the USB media into the
primary (top) USB port on the
machine.
e
Touch
 When updating is finished, the completion message appears.
f
Turn the machine off, remove the USB media, and turn the
machine on again.
g
Touch
Settings screen, and check that
the machine's software version is
later than following version.
Version 2.0 or later
* The number of pages on the Settings screen varies depending on the model.
 Machine is now ready to certify the KIT.
h
Continue with the following steps to certify the KIT.
For Machines Connected to a Wireless
LAN
For Machines NOT Connected to a
Wireless LAN
Step 2-A: Certifying the KIT (For Machines
Connected to a Wireless LAN)
a
Check that the wireless LAN
icon in the upper left corner of
the machine's screen is blue.
* If part of the wireless LAN icon is blue, the machine is connected to
wireless LAN.
* If the wireless LAN icon is gray, the machine is not connected to wireless
LAN. Refer to page 5 "Step 2-B: Certifying the KIT (For Machines NOT
Connected to a Wireless LAN)" and certify the KIT.
.
to display the
Step 2-A (page 3)
Step 2-B (page 5)
3