Brother STELLAIRE INNOV-IS XJ1 Guia De Instalacion página 6

f
After a message appears, indicating that the machine number
and activation code will be sent to the server, touch [OK].
g
When certification of the kit is complete, a message appears,
indicating that certification was successful.
Turn off the machine, and then turn it on again.
h
Confirm that there is a check
mark beside the kit number in
the machine's Settings screen.
 When steps are completed, the kit has been certified, and
the new features can be used.
i
Continue with "Step 3: Downloading the Manuals for the KIT"
on page 6.
Step 2-B: Certifying the KIT (For Machines NOT
Connected to a Wireless LAN)
If the machine cannot connect to wireless LAN, access the
activation site and certify the KIT.
a
Display the machine's Settings
screen, and check the machine
number.
5