Metabo W 8-115 Instrucciones De Manejo página 9

17026938_1009 kl WS W 8_115 ff NAFTA Protect.book Seite 9 Mittwoch, 21. Oktober 2009 4:34 16
tions for more information on the spindle length
and thread.
Always wear protective goggles.
During machining, of metals in
particular, conductive dust can
form deposits inside the machine. This can lead to
the transfer of electrical energy onto the machine
housing. This can mean a temporary danger of
electric shocks. This is why it is necessary when
the machine is running to blow compressed air
through the rear ventilation slots of the machine
regularly, frequently and thoroughly. Here, the
machine must be held firmly.
We recommend using a stationary extractor
system and connecting a residual current circuit-
breaker (FI) upstream. When the angle grinder is
shut down via the FI circuit-breaker, it must be
checked and cleaned. See chapter 9 Cleaning for
more information on cleaning the motor.
The dust created when work is in progress can
often be damaging to health (e.g. during
processing of oak and beech wood, stone, metal
and paintwork which can contain lead or other
harmful materials). This dust should not be allowed
to penetrate the body. Use vacuum extraction
appliances and wear suitable masks to provide
additional protection from dust. Remove any accu-
mulation of dust thoroughly, e.g. by vacuuming
with the appropriate special suction unit. Dust is
potentially explosive.
Materials that generate dusts or vapours that may
be harmful to health (e.g. asbestos) must not be
processed.
When working in dusty conditions, ensure that
ventilation openings are not blocked. If it becomes
necessary to remove dust, first disconnect the
power tool from the mains supply (use non-
metallic objects) and avoid damaging internal
components.
Damaged, eccentric or vibrating tools must not be
used.
Avoid damage to gas or water pipes, electrical
cables and loadbearing walls (static).
Connect a FI circuit-breaker with max. release
current (30 mA) upstream when using the machine
outdoors!
Pull the plug out of the socket before making any
adjustments, converting or servicing the machine.
Metabo S-automatic safety clutch. When the
safety clutch responds, switch off the machine
immediately!
A damaged or cracked additional handle must be
replaced. Never operate a machine with a defec-
tive additional handle.
All manuals and user guides at all-guides.com
A damaged or cracked safety guard must be
replaced. Never operate a machine with a defec-
tive safety guard.
This power tool is not suitable for polishing work.
Improper use of the machine will void the warranty!
The motor may overheat and damage the electric
power tool.
Symbols on the tool:
...........Class II Construction
V ...............volts
A...............amperes
Hz.............hertz
.../min .......revolutions per minute
~ ...............alternating current
..............alternating current /direct current
n ...............rated speed
ANSI/UL Standards, for use in Canada and the
U.S., respectively.
4 Overview
See page 3 (please unfold).
1 "Quick" clamping nut *
2 Support flange
3 Spindle
4 Spindle locking button
5 Sliding on/off switch
6 Electronic signal indicator *
7 Speed adjustment wheel *
8 Switch-on lock *
9 Trigger *
10 Additional handle / Additional handle with
vibration damping *
11 Safety cover
12 Supporting flange for type 27 wheels 6"
diameter *
13 Clamping nut *
14 2-hole spanner *
15 Lever for safety guard attachment
* depending on equipment/not in scope of delivery
5 Special Product Features
• Powerful angle grinder with efficient cooling for
rapid work progress even under the toughest
operating conditions
• Robust, durable Metabo marathon motor
ENGLISH
The "C" and "US" indicators adjacent to
the CSA Mark signify that the product has
been evaluated to the applicable CSA and
ENG
9