Ryobi TS1346 Manual Del Operador página 18

 L oosen the fence screw and slide the partial sliding miter
fence toward the blade to access the socket head screws
securing the left miter fence to the table.
 Loosen the socket head screws that secure the miter
fence to the saw base.
 Rotate the miter fence left or right until the saw blade is
parallel with the square.
 Retighten the screws securely and recheck the blade-to-
fence alignment.
 Return the partial sliding miter fence to the home position
and retighten the fence screw to secure.
Your saw has several scale indicators. After squaring
adjustments have been made, it may be necessary to
loosen the indicator screws and reset them to zero. See
Figures 18 and 19.
SOCKET HEAD
MITER
PARTIAL
FENCE
SLIDING
MITER
FENCE
SCREW(S)
FENCE
SCREW
ASSEMBLY
BEVEL
SCALE
Fig. 17
18 — English
INDICATOR
SCREW
SCALE
INDICATOR
SCALE
INDICATOR
Fig. 18
INDICATOR
SCREW
MITER
SCALE
Fig. 19